London Forklift Training School

London Forklift Training School - Forklift Training School - For The Safety Of Both The Equipment And The Operator - OSHA and CSA establish criteria for forklift safety training which meets current standards and regulations. Anyone planning to use a forklift is needed to successfully finish safety training before utilizing whichever type of forklift. The accredited Forklift Operator Training Program is intended to provide those training with the practical skills and information to become a forklift operator.

There are forklift operation safety regulations which should be followed pertaining to pre-shift checks, and rules for loading and lifting.

An inspection checklist should be done and given to the supervising authority before starting a shift. When a maintenance problem is uncovered, the use of the particular machine must be discontinued until the problem has been addressed. To indicate the machine is out of order, the keys need to be removed from the ignition and a warning tag placed in a spot which is visible.

Safety regulations for loading will consist of checking the forklift's load rating capacity to know how much the equipment can handle. When starting the machine, the forks must be in the down position. Don't forget that there is a loss of roughly one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting must begin with the driver moving to a stopped position around three inches from the load. The mast should then be leveled until it has reached a right angle with the load. Lift the forks to one inch beneath the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to alert other staff. Do not allow forks to drag on the ground.

Click to Download the pdf